Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

PBT弹性体微相分离及对其力学性能的影响研究

为了获得微相分离对宽温PBT叠氮聚醚弹性体力学性能的影响规律,用红外光谱分析法(FT-IR)和动态热力学分析法(DMA)研究了PBT叠氮聚醚弹性体产生微相分离的机理和影响因素。用调节硬段含量、交联参数的方法调控其微相分离,控制适当的微相分离程度可显著改善推进剂的力学性能。研究结果表明:在二元醇扩链的弹性体体系中,当硬段含量约为15%时,弹性体发生相对最大比例的微相分离,体现出较佳的综合力学性能。通过微相分离的调控可获得宽温范围内综合力学性能较好的叠氮聚醚推进剂用粘合剂基体材料。     

Obscured Activity: AGN, Quasars, Starbursts and ULIGs Observed by the Infrared Space Observatory

Some of the most ‘active’ galaxies in the Universe are obscured by large quantities of dust and emit a substantial fraction of their bolometric luminosity in the infrared. Observations of these infrared luminous galaxies with the Infrared Space Observatory (ISO) have provided a relatively unabsorbed view to the sources fuelling this active emission. The improved sensitivity, spatial resolution and spectroscopic capability of ISO over its predecessor Infrared Astronomical Satellite (IRAS) of enabled significant advances in the understanding of the infrared properties of active galaxies. ISO surveyed a wide range of active galaxies which, in the context of this review, includes those powered by intense bursts of star formation as well as those containing a dominant active galactic nucleus (AGN). Mid-infrared imaging resolved for the first time the dust enshrouded nuclei in many nearby galaxies, while a new era in infrared spectroscopy was opened by probing a wealth of atomic, ionic and molecular lines as well as broad band features in the mid- and far-infrared. This was particularly useful, since it resulted in the understanding of the power production, excitation and fuelling mechanisms in the nuclei of active galaxies including the intriguing but so far elusive ultraluminous infrared galaxies. Detailed studies of various classes of AGN and quasars greatly improved our understanding of the unification scenario. Far-infrared imaging and photometry revealed the presence of a new very cold dust component in galaxies and furthered our knowledge of the far-infrared properties of faint starbursts, ULIGs and quasars. We summarise almost nine years of key results based on ISO data spanning the full range of luminosity and type of active galaxies.     

弹道靶红外辐射测量

为深入认识再入物理现象 ,在弹道靶上做了模型头部和近尾流红外辐射测量。发射器为 1 4.5mm口径的二级轻气炮 ,模型为1 0mm的球 ,材料为聚碳酸酯和铝 ,模型发射速度 4～6km/s,使用红外InSb探测器测量波长 3～ 5 .4μm的红外辐射 ,靶室压力 5 .32kPa。实验中使用光电法测量模型速度 ,两站阴影照相进行模型姿态监测和速度核实。实验结果表明 :球模型的红外辐射强度强烈依赖于模型材料和模型飞行速度。对不同材料模型头部和尾流部辐射强度的定性比较说明由于低温材料烧蚀产物的存在 ,极大地增强了头部和近尾流区的辐射强度 ,而且延长了尾流辐射长度     

Cd1-xZnxS体系红外光谱及发射率特性

制备了Cd1-xZnxS三元系半导体材料。利用X射线衍射(XRD)对其结构进行了表征,结果表明实验所得样品均为纤锌矿结构。建立了Cd1-xZnxS混晶替位模型,根据所建模型和晶格振动理论,对Cd1-xZnxS红外光谱特性进行探讨。研究了Cd1-xZnxS三元系半导体材料红外发射率特性,Cd1-xZnxS在3~5μm波段的发射率远远低于8~14μm波段的发射率,这与材料的红外吸收机制和光谱特性有关;Cd1-xZnxS半导体材料的红外发射率随着烧结温度的提高而降低,这是由于温度升高,晶格畸变减小并逐渐趋近于完整晶格。     

靶机红外目标模拟装置的研究

通过对一种靶机红外目标模拟装置的研究，介绍了这种装置的设计特点、参数选择和试验结果。该装置以固体燃料作为燃烧剂，其红外辐射强度主要决定于燃料的组分、工作温度、辐射体的材料以及辐射体的面积，而工作温度的选取是设计的关键。文中提出一种实用而简便的综合分析方法，根据装置所需要的红外辐射强度来预计其工作温度与结构尺寸，据此设计的装置实物经红外辐射特性测定后证明能满足预定指标要求。本文陈述的这种方法已被用于某靶机红外目标模拟装置的设计，并取得实际应用成果，对同类装置的设计和研究可资借鉴     

红外隐身材料的研究进展

红外探测器的高度发展已使用于目标表面的热红外隐身材料成为飞行器隐身技术中的一个重要组成部分。但对这种材料的发展情况,以往的文献一向较少涉及。本文概括了这种材料的一般性能要求,较全面地评述了十余年来红外隐身材料研究中各主要方面的发展情况,并分析了一些重要材料品种的特点、性能水平、技术影响因素、存在的问题和发展趋势。     

反导系统中的目标识别技术及其发展趋势

指出了反导系统目标识别的难点和特点。回顾了反导系统中的红外识别技术和雷达识别技术,并探讨了反导系统目标识别技术的发展趋势。     

红外探测阵列对固体导弹尾焰跟踪定位的研究

通过分析研究建立了前视红外探测阵列ＦＬＩＲ（Ｆｏｒｗａｒｄ Ｌｏｏｋｉｎｇ Ｉｎｆｒａ－Ｒｅｄ）对导弹进行精确跟踪、定位的数学模型，其中包括导弹的运动模型、大气干扰模型和探测阵列的观测模型。利用探测阵列ＦＬＩＲ的原始观测数据，扩展卡尔曼滤波器（ＥＫＦ）精确跟踪导弹目标。由于导弹与探测器的距离较远，故为视为点目标。导弹在探测阵列上投影的位置由两部分组成：导弹真实运动位置和由于大气干扰造成的偏移。滤波     

固体火箭发动机排气羽流对红外制导信号衰减的计算方法

固体火箭发动机排气羽流对红外制导信号的衰减研究,对红外信号的探测与制导具有重要的理论和应用价值。文中主要介绍了红外制导信号的衰减机理,提出了计算排气羽流红外制导信号衰减的有效方法,编制了计算软件DROP,用该软件计算了水雾及颗粒群的光谱透射比,并与SIRRM软件的计算数据进行了对比。结果表明,两者数据基本一致,在工程应用中具有较大的参考价值。